Transmitters Pulse & Frequency Pulse Converter JH377 (Dual Channel)
Tuesday, 31 May 2011 02:18 Last Updated on Monday, 29 August 2011 01:22 Written by Administrator

2-CHANNEL LOGIC PULSE CONVERTER
5V TTL / Open Collector

    • Converts TTL (5V) Logic Pulses to Open-Collector Output, or Open-Collector to TTL (Jumper-Selectable)
    • Low Cost 2-Channel Design
    • Compact DIN-Rail Mount (34 channels per foot)
    • Pulse Rates from DC to 100kHz
    • DC Power, 7 to 24Vdc
    • Full Replacement Warranty

    JH377
    PDF
    DATA SHEET

    JH377
    PDF
    MANUAL

Model JH377 is a pulse in, pulse out logic converter. Its input accepts 5 volt (TTL-compatible) or open-collector logic pulses (jumper selectable). The output, also jumper selectable, produces either 5 volt or open-collector output pulses in response. DC input coupling (no capacitor) permits operation down to zero Hz. For low level input such as tachometer pickups see our companion product, Model JH376.

Two channels are included in the 0.7 inch (17.8mm) wide enclosure, providing densities of almost 3 channels per inch. DC power may be anywhere between 7 and 24 volts. A green LED indicates power. Model JH377 does not provide input, output or power isolation.

ORDERING INFORMATION

Model Number:  JH377
Specify Input Style:  Logic Pulse or Pull-up (field-changeable using jumpers).
Specify Output Style:  Logic Pulse or Open Collector (field-changeable using jumpers).
Urethane Coating:  Specify Option U

INSTALLATION AND CONNECTIONS

Model JH377 snaps onto 35mm DIN rail. Connections are made to the terminals (as marked on case).

Connections to the 8 terminals are:
A:  Common.
B:  Output 1.
C:  Common.
D:  Output 2.
E:  Input 2.
F:  Power.
G:  Input 1.
H:  Common.

DETAILED SPECIFICATIONS

Inputs (jumper-selectable): 

5 volt logic (TTL compatible): 10K input resistance. Pull-up resistor: 10K to +5 volts.
Outputs (jumper-selectable):  5 volt logic pulses ≥ 500 ohm load resistance. Output is LOW when input is HIGH. Open-collector, NPN: +30V max., 40mA max. load current. "On" voltage drop at 40mA is 1 volt or less. Output is OFF when input is HIGH.
Frequency Response:  0-100kHz.
Input & Output Jumpers:  Circuit board jumpers select the input and output styles. Snap off cover for access.
Power Requirements:  7Vdc min., 24Vdc max. 10mA quiescent current.
Operating Temperature:  -40 to +80˚C (-40 to +176˚F).
Dimensions:  2.47" high, 2.52" deep, 0.70" wide (63 x 64 x 18mm)