JH5600/5610 AC INPUT TRANSMITTERS
DIN-RAIL MOUNT, FIXED RANGE
JH5600: AC Input Transmitter
JH5610: AC Input Transmitter with True RMS Response
Model JH5600 and JH5610 AC Input Transmitters provide an isolated DC output proportional to an AC voltage or current input.
Model JH5600 is average responding, calibrated to provide accurate RMS readings with sine wave inputs. Accuracy will be degraded with nonsinusoidal waveforms such as from SCR/Triac speed and power controllers or pulse-modulated motor drives. For accurate readings with nonsinusoidal waveforms use true-RMS responding Model JH5610.
Red-green Quick-Check LEDs give a quick indication of the relative output. Red is brighter at the low end, green at high, while at mid-scale both are approximately equal. Red-only indicates offscale low while green-only indicates offscale high.
Available options include AC and DC power choices and reverse-acting transmitter (decreasing output with increasing input).
JH5600 Series transmitters snap onto 35mm DIN rail. Connections are made to the front-panel terminals. The terminal strip unplugs to facilitate calibrating or replacing the transmitter.
Connections to the 8 terminals (top to bottom) are:
1: AC input.
2: AC input.
3: No connection.
4: No connection.
5: Output plus.
6: Output minus.
7: Power (AC or, if DC power option, DC plus).
8: Power (AC or, if DC power option, DC minus).