PLUG-IN ALARMS

SWITCH-SELECTABLE HI/LO TRIP FUNCTION                         

AC AND DC POWER OPTIONS AVAILABLE                

ADJUSTABLE DEADBAND IS STANDARD     

5 AMP, 230VAC RELAY CONTACTS

         FULL REPLACEMENT WARRANTY

                  ALL STANDARD INPUT STYLES

JH Technology's plug-in alarm modules monitor standard DC, AC or transducer signals and provide relay contact closure outputs. Their 5 amp, 230Vac contacts may be used to actuate alarms, to turn heaters, valves etc. on and off or to signal events to annunciator, datalogger or programmable logic control (PLC) systems. Plug-and-play socket installation lets you remove and replace alarms without rewiring. These modules often provide low-cost alternatives to other monitoring systems.

Available models accept inputs from most standard transducers as well as low- or high-level voltage and current sources. Computational models also are available. Single and dual trip alarms are offered. Top-accessible switches allow easy selection of HI or LO (or HI-HI, HI-LO, LO-LO) trip function. Adjustable deadband is standard on both single and dual trip models. Red/green alarm status LEDs are visible through the tops of the units. AC and DC power options are available.

For specifics on the style you need, click on the model number in the chart below.

For a list of all JH Technology products by model number, click here.

PLUG-IN ("PLUG-AND-PLAY") ALARMS

"Don't see what you need? Ask about specials." 

JH TECHNOLOGY
4233 CLARK RD
UNIT 9
SARASOTA, FL  34233
1(800)808-0300  1(941)927-0300
FAX:  1(941)925-8774